SMT production equipments PCB production equipmentsSemiconductor production equipmentsAll series of productions
leaf-free hot air and reflow oven
Full hot air lead-free reflow Oven with six heating-zones TN360C
Full hot air Reflow Oven TN380C
Full hot air Reflow Oven TN380C
Full hot-air Reflow Oven TN370C
Full hot air lead-free Reflow Oven with five temperature-zone TN350C
Large-size lead-free Reflow Oven with Eight heating-zones A8
Large-size lead-free Reflow Oven with Eight heating-zones A8N
Large-size lead-free Reflow Oven with Eight heating-zones A10
Large-size lead-free Reflow Oven with Eight heating-zones A10N
Large-size lead-free Reflow Oven with Eight heating-zones R800
Large-size lead-free Reflow Oven with Eight heating-zones R800N
Large-size lead-free Reflow Oven with Eight heating-zones R1000
Large-size lead-free Reflow Oven with Eight heating-zones R1000N
 
Full hot air lead-free reflow Oven with six heating-zones TN360C
 
六温区Large-size lead-free  Reflow Oven  with six temperature-regionTN360C
  Browsing number of times:  
Trade name】:Full hot-air lead-free reflow Oven with six Heating-zones TN360C Tel】:0086-10-51669522
Manufacturer】:Torch Technology Model】:TN360C

Introduction】:

Product instruction of TN360C:
1:Heating system: TN360C adopts high effective nickel-chromium heating tube. Advanced technology and Long life. The hot-air circle system which design by Torch, it warm up quickly and make PCB component be heated totally.
2: Protection system: It adopts a SSR solid relay of big current and high pressure resistant to non-contact output. Safety and reliably. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.
3: Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles
4: Outer shell and furnace body of TN360C can be opened wholly and automatically. It is convenient to clean and maintain it.

Remark】:

Main features for TN360C:
A:Intuitional welding control: TN360C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time。
B:Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly .Speed:0-1600mm/min。
C:Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.
D:Power-off protection: To keep PCB output normal. Windows operating platform has a strong functions and high stability。
E:Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding ?different PCB plates and components。

Technical instruction:
A:Type:TN360C
B:Temperature control segment:12 up 6/ below 6,extra:Cooling monitor system, up 1/ below 1
C:Temperature control accuracy:±2℃ Warm-up time : 30min
D:Temperature range:Room-temperature -360℃
E:Heating supply: full hot-air micro-circular convection
F:Automatic relay heating system:When start the equipment, it can protect the controller and motor against instantaneous current and voltage and protect component when it is welding.
G: Transmission belt :Stainless steel netting belt/belt width: 300mm
H:Belt speed : 0-1600mm/Min free adjusting
I:Warning system :automatic warning with pilot light or sound when temperature is over.
J:Cooling system: Transverse flow vortex centrifuge blower
K:Power Supply :three phase four wires , 380V
L:Max power:19KW
M:Weight:680kg
N:Dimension Size : length * width * Height(2900×900×1300mm)