SMT production equipments PCB production equipmentsSemiconductor production equipmentsAll series of productions
leaf-free hot air and reflow oven
Full hot air lead-free reflow Oven with six heating-zones TN360C
Full hot air Reflow Oven TN380C
Full hot air Reflow Oven TN380C
Full hot-air Reflow Oven TN370C
Full hot air lead-free Reflow Oven with five temperature-zone TN350C
Large-size lead-free Reflow Oven with Eight heating-zones A8
Large-size lead-free Reflow Oven with Eight heating-zones A8N
Large-size lead-free Reflow Oven with Eight heating-zones A10
Large-size lead-free Reflow Oven with Eight heating-zones A10N
Large-size lead-free Reflow Oven with Eight heating-zones R800
Large-size lead-free Reflow Oven with Eight heating-zones R800N
Large-size lead-free Reflow Oven with Eight heating-zones R1000
Large-size lead-free Reflow Oven with Eight heating-zones R1000N
 
Full hot air Reflow Oven TN380C
 
八温区Large-size lead-free  Reflow Oven  with six temperature-regionTN380
  Browsing number of times:  
Trade name】:Full hot air Reflow Oven TN380C Tel】:0086-10-51669522
Manufacturer】:Torch Technology Model】:TN380

Introduction】:

★Temperature control system : automatic temperature control by PID intelligence microcomputer
★Heating system: ceramic and stainless steel heater
★Transmission system:AC conversion for adjusting the speed freely and vortex reducer
★Alarm system: automatic pilot light alarm
Features for TN380C
A. High reliability, component make at high temperature, so the character is stable.
B.High agility, eight temperature-zones. It meets the requirement of SMT welding. It can be used as solidified stove at the same time.
C.Low price, long life
D.For the middle size, it can meets all requirements from customs.
Apply cycle heating system to make the component to get the heat totally.

 

Remark】:

Technical instruction:
A: Temperature control segment: 8 pcs
B: Temperature-zone Number: 8pcs
C: Temperature control system: automatic temperature control with PID intelligence microcomputer. SSR non-contact output
D:Temperature control accuracy:±2℃
E:Warm-up time : 25min
F:Temperature range: Room-temperature -360℃
G:Heating supply: full hot-air convection
H:Transmit Belt : Stainless steel netting belt.
I: Transmit Belt width : 300mm
J: Transmit Belt speed : 0-1600mm/Min free adjusting
K:Warning system :automatic warning with pilot light or sound when temperature is over.
L: Protection system: When power off suddenly, you can start special operation to send PCB out and will not be damaged.
M:Cooling system: Transverse flow vortex centrifuge blower
N:Power Supply : three phase four wires三相四线,380V
O:The upper part of the oven can be opened, we can clean the inside easily.
O:Max power:12KW
P:Weight:420kg
Q:Dimension Size : length* width * Height(3100*760*1360mm)